Structural Bonding

Five-minute 2K epoxy adhesive suitable for optically transparent gluing line. For glass bonding and general purposes.

• 84101 – 25 ml gun

Four-minute 2K epoxy adhesive ideal for repairing and filling gaps, patching, and filling damaged metal parts.

• 84109 – 25 ml gun

It is easy to apply, especially in hard-to-reach places. It adheres well to various surfaces, thus replacing soldering, insulating tape, wire clips, and heat-shrink tubing. In less than 5 minutes, it becomes non-sticky and provides a permanently elastic bond.

• 85120 118 ml

WELDYX MULTI POWER BEIGE is a two-component methacrylate-based adhesive with a mixing ratio of 1:1, intended for high-strength structural bonding. Due to its broad adhesion spectrum, the product is suitable for bonding a wide range of plastics, composites and metals without the necessity of priming for surface pre-treatment.

• MP3.S25 25ml

WELDYX MULTI POWER 3 BLACK is a two-component methacrylate-based adhesive with a mixing ratio of 1:1, intended for high-strength structural bonding. Due to its broad adhesion spectrum, the product is suitable for bonding a wide range of plastics, composites and metals without the necessity of priming for surface pre-treatment.

• MPS.S25 25ml

WELDYX MULTI POWER 10 BEIGE is a two-component methacrylate-based adhesive with a mixing ratio of 1:1, intended for high-strength structural bonding. Due to its broad adhesion spectrum, the product is suitable for bonding a wide range of plastics, composites and metals without the necessity of priming for surface pre-treatment.

• MP10.S25 25ml

WELDYX PLASTCOMET ANTHRACITE is a two-component methacrylate-based adhesive with a mixing ratio of 10:1. It is ideal for highstrength structural bonds that need to be elastic and stretchable.

• MMA_PCM5G.K50 50ml

WELDYX PROFESSIONAL BLACK is a high-performance adhesive developed especially for structural bonding of metals, composites and plastics. It is available with processing times of 5 and 15 minutes. This two-component methyl methacrylate adhesive with a mixing ratio of 10:1 allows to obtain strong, flexible and highly resistant bonds. The product properties have been specifically adapted to the requirements of railway, commercial vehicle, marine and transport industries.

• WXPRO15.K50 50ml

WELDYX PROFESSIONAL BLACK is a high-performance adhesive developed especially for structural bonding of metals, composites and plastics. It is available with processing times of 5 and 15 minutes. This two-component methyl methacrylate adhesive with a mixing ratio of 10:1 allows to obtain strong, flexible and highly resistant bonds. The product properties have been specifically adapted to the requirements of railway, commercial vehicle, marine and transport industries.

• WXPRO5.K50 50ml

WELDYX PLASTCOMET ANTHRACITE is a two-component methacrylate-based adhesive with a mixing ratio of 10:1. It is ideal for highstrength structural bonds that need to be elastic and stretchable. Because of its wide adhesion spectrum, WELDYX PLASTCOMET ANTHRACITE is suited for bonding a wide range of plastics, composites and metals.

• MMA_PCM20G.K50 50ml

WELDYX CLEANER is a high-performance cleaner based on hydrocarbon solvents, alcohols and ether solvents. The cleaning agent contains more than 90 % active ingredients and is the perfect solution for most cleaning procedures in industry, workshops and companies.

• WXC.D400 400ml

WELDYX MULTI POWER 1 TRANSPARENT is a fast-curing two-component acrylic adhesive with a mixing ratio of 1:1 allowing to obtain high-quality structural bonds. It provides rigid and high-strength bonds for a wide range of materials.

WELDYX MULTI POWER 1 TRANSPARENT is ideal for bonding transparent plastics. Due to its unique composition, it meets high requirements for assembly and industrial applications. It can also be used for bonding stone, wood, composites, thermoplastics, duroplastics and metals.

• MPT.K50 50ml

WELDYX MASTER BLACK is a high-performance methacrylate based adhesive intended for structural, semi-flexible and highly resistant bonding of metal, composite and plastic elements. This two-component adhesive, mixed in a 10:1 ratio, is available with processing time of 5,15 and 30 minutes.

Its properties are specifically adapted to the requirements of industrial companies. These properties have also been confirmed by a product analysis carried out by the Instytut Kolenjnictwa, Warsaw. WELDYX MASTER 5 BLACK has been positively verified according to the DIN EN 45545-2/ R1 standard and by meeting the fire protection level HAZARD LEVEL HL 3, it is perfectly suited for rail vehicles with a high hazard class.

• WXM5.K50 50ml

WELDYX POLYPLAST 3 is a shock-resistant, structural, solvent-free specialist adhesive designed for bonding low-energy plastics and difficult surfaces to bond.

• WXPYP.K50 50ml

WELDYX MASTER BLACK is a high-performance methacrylate based adhesive intended for structural, semi-flexible and highly resistant bonding of metal, composite and plastic elements. This two-component adhesive, mixed in a 10:1 ratio, is available with processing time of 5, 15 and 30 minutes.

• WXM15.K50 50ml

WELDYX MASTER WHITE is a high-performance adhesive for structural bonding of metals, composites and plastics. This two-component methyl methacrylate adhesive, mixed in a 10:1 ratio, is available with processing time of 5, 10 and 15 minutes. WELDYX MASTER WHITE allows to achieve high-strength and at the same time flexible and highly resistant structural bonds.

• WXM15W.K50 50ml

WELDYX MASTER WHITE is a high-performance adhesive for structural bonding of metals, composites and plastics. This two-component methyl methacrylate adhesive, mixed in a 10:1 ratio, is available with processing time of 5, 10 and 15 minutes. WELDYX MASTER WHITE allows to achieve high-strength and at the same time flexible and highly resistant structural bonds.

• WXM5W.K50 50ml

WELDYX MASTER WHITE is a high-performance adhesive for structural bonding of metals, composites and plastics. This two-component methyl methacrylate adhesive, mixed in a 10:1 ratio, is available with processing time of 5, 10 and 15 minutes. WELDYX MASTER WHITE allows to achieve high-strength and at the same time flexible and highly resistant structural bonds.

• WXM10W.K50 50ml

With WELDYX® Multi Craft, high-strength, structural and at the same time flexible, durable bonded joints are possible. WELDYX® Multi Craft is an industrial adhesive used for joining metals, plastics and composites. Due to its high quality, it is specially designed to meet the requirements of a wide range of industrial applications. The use of primers is not necessary for bonding aluminum and stainless steel. Its flexibility also allows materials with different coefficients of thermal expansion to be structurally bonded. Compared to conventional MMA adhesives, WELDYX® Multi Craft scores with exceptionally low shrinkage behavior, as well as thermal, chemical and climatic stability. Due to its high reaction speed, the product is particularly well suited for serires production and on-site repairs, such as on wind turbines.

• WXMC2.K50 50ml

WELDYX® ACRYLATE CLEAR is a 2-component acrylate adhesive with a mixing ratio of 1:1 and offers maximum performance for demanding applications. Developed for high-strength and rigid bonds, it excels in particular with transparent and optically demanding bondings. These include plastics such as PMMA (Plexiglas®), metals and composites.